The introduction of Kunshan mould factory to the full-automatic roller type belt carrier molding machine

1. Belt feeding system: automatic tension belt feeding system with brake, light sensor sending signal, completed by PLC control, speed adjustable.

2. Belt feeding buffer: belt bending and strain caused by unstable feeding can be solved by belt feeding buffer.

3. Preheating system: PLC preheating and temperature control system is set at the feeding port, which can improve the forming speed and prevent the forming belt from porosity and poor forming.

4. Forming system: under the action of vacuum and hot air, the preheated material belt is rapidly formed by continuous revolving mold, and demoulded under the guidance of the guide mechanism to form a pocket that conforms to the size.

5. Trimming system: equipped with guiding mechanism and precision trimming wheel, to cut off the excess material to complete the width of the belt. And complete the edge extraction, high-precision mechanical unique edge cutting mechanism can ensure the smooth edge cutting without burr

6. Punching mechanism: high precision mechanical movement mechanism, which can continuously and high-speed punch out chain holes conforming to EIA standards, and ensure that the chain holes are smooth and free of burrs.

7. Winding buffer: automatic tension buffer PLC control speed adjustable to ensure the finished product is not damaged